In today's video we are going to design and cut out a 12-foot built in bookshelf and desk using a cabinet design software called mozaik!

As you guys requested, this video is to show you how easy it is to design cabinetry in mozaik. It’s a drag and drop setup and then you can modify each cabinet as needed.

Part 2 of this series-
   • Cabinet design made easy.  #mozaik #c...  

While it is really easy in its initial thought, it can get really intricate too. It takes a lot of practice and time in the program to get really proficient at it.

A lot of the learning is also based on knowing how you want to build. And knowing what details you want to have in a cabinetry design.

After you learn how to design, then you’ll need to understand how to operate your CNC with the program as well. Knowing your feeds and speeds, what bits you’ll need and how you want to transfer your files from the program to the CNC.

Mozaik is not just made for CNC’s though. You can also just use it as a design and cut-list software too.

At the end of this video I tell you about today’s sponsor. ‪@ALLSTARCNCPRODUCTS‬
I use all star CNC’s tile gasket on the spoil board of my CNC. The revolutionary tile gasket is used to increase the vacuum hold down power of my CNC! This is needed especially for when you are cutting small parts. When you are cutting parts out at speeds of 600 inches per minute or more, you don’t want to have a small part come flying off the machine. Losing a part while cutting is not only a safety concern but it’s costly too! You have to spend labor hours to recut that part and it will cost you in material costs as well.

If you want try out some of the all star CNC products, here is the link! I highly recommend them!

https://store.allstarcnc.com/tile-gasket

Mozaik Software

https://www.mozaiksoftware.com/produc...

My Phantom CNC‪@phantomcncsystems‬
https://www.phantomcncsystems.com/


00:00 - Welcome back to the NolanBuilt Channel
00:21 - Designing in Mozaik
13:12 - Mozaik Optimizer (cut list for CNC)
16:14 - Lets start cutting on the CNC
17:35 - Labeling parts
18:45 - Organizing parts
21:45 - Allstar CNC Tile Gaskets