Find the parts used in the video on CarParts.com just there https://carparts.solutions/F150

⚙️ NEEDED CARPARTS AND PRODUCTS
- Exhaust manifolds : https://carparts.solutions/ExhaustMan... and https://carparts.solutions/ExhaustMan...

- Penetrating oil

💪 TIGHTENING TORQUES
- No tightening torques for this operation

🛠 TOOLS
The toolbox recommended by CARPARTS.COM to repair your Ford F-150 :
- https://carparts.solutions/ToolBox

List of the tools we used to replace the exhaust manifold on a Ford F-150 :
- Hydraulic jack : https://carparts.solutions/FloorJack
- Jack stands : https://carparts.solutions/JackStands
- Wheel lug wrench
- Fork
- Flat head screwdriver
- Ratchet
- 5,5mm socket
- Phillips screwdriver
- Wire brush
- 13mm socket
- Extender
- 10mm socket
- Paper towels
- Fine sandpaper

Don't forget to subscribe :    / @carpartscomofficial  

🛻 COMPATIBLE VEHICLES
The operation and tools displayed in the video should be available on the following vehicles :
- 2009 Ford F150
- 2010 Ford F150
- 2011 Ford F150
- 2012 Ford F150
- 2013 Ford F150
- 2014 Ford F150

📽 🛠 USEFUL VIDEOS 🛠 📽
- How to jack your Ford F-150 safely :    • How to jack your Ford F150 safely ? ⬆ 🚗  

- How to replace the Catalytic Converter 2009-2014 Ford F150 🛻 :    • How to replace the Catalytic Converte...  

⚠️ CARPARTS.COM'S INFOS
- The exhaust manifolds are the connecting parts between the engine and the catalytic converters. As such, to be able to remove the exhaust manifold, you need to remove the catalytic converter.

- Prepare for the installation of the new exhaust manifold by plugging the exhaust outlet holes with paper towels. Then, using a piece of fine sandpaper, clean the surface of the engine that supports the exhaust manifold.

- It is important to put in new threaded rods and retaining nuts on the exhaust manifold because they are not reusable.

🚨 DISCLAIMER
This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area.

📚 CHAPTERS
0:00 Intro
0:11 How to pull up your F150
0:44 How to remove the catalytic converter
1:05 Remove the mudguard
1:37 Remove the exhaust manifold upper nuts
2:42 Remove the heat shield
3:12 Remove the exhaust manifold lower nuts
3:48 Remove the exhaust manifold
4:00 Clean the exhaust manifold contact surface
4:45 Put the exhaust manifold back
5:53 Put the heat shield back
6:08 Put the catalytic converter
6:23 Put the mudguard back + lower the truck