Thank you for watching!! If we helped you out and you want to show your support - LIKE, SUBSCRIBE or give us a shout out below. If you saw something you didn't like leave your comment below as well, these things help us get better!

To see our recommended tools and products visit our Amazon shop at https://www.amazon.com/shop/individua...

We ultrasonically clean/rebuild carburetor on Briggs and Stratton 1022 E R 1696727 snow blower with 13A135-0002-F1 engine.

We diagnosed it as having a carburetor issue. Customer said it was leaking gas and we could not get it to start. We checked for spark and it seemed to have good compression.

The oil level was good also but it still would not start.
We clean the carburetor thoroughly and show how to fix the snowblower right.

Briggs & Stratton 1022E
Briggs & Stratton 1022ER

This same process is used for many different models of these snow engines of different horsepower

Always check the oil level before starting. Sometimes fuel can be mixed into the crankcase which will cause major issues if started like this.

If the carburetor is really bad, replace it instead of cleaning/rebuilding it.

You can purchase the carburetor part number 595785 at https://amzn.to/3GwWEz5

If you replace the carburetor, be sure to check and clean the new carburetor because the quality control is not good.

This does not matter if you are using OEM or aftermarket replacement. They should both be checked before installing. See our video on this also!

Like and subscribe to see more helpful videos like this one! Save some money by doing it yourself!

#briggsandstratton #smallenginerepair #individualizedrepair #smallbusiness #diymaintenance

About Us:
My name is Martin. I have been repairing tools and small engines for almost 20 years. We operate a small engine repair shop in Illinois. We service / repair Briggs & Stratton, Kohler, Kawasaki, John Deere, Cub Cadet, Toro Tecumseh, Loncin, Honda, Craftsman, Husqvarna, MTD, Troy Bilt, Simplicity, John Deere, Exmark, LCT, Generac and many more brands. We work on riding mowers, walk behind mowers, snow blowers, zero turns, generators, pressure washers and much more. We normally repair about 3,000 pieces of equipment every year and look at many more that are beyond an affordable repair. Hopefully our videos will save you some money and give you the information you need to work on your own equipment or figure out the issue at hand.

Disclaimer: Links included in the description are affiliate links. As an Amazon associate we earn from qualifying purchases. There will be no additional charge to you for purchasing here. We appreciate your support, which allows us to continue to provide original content!

Please be careful when repairing any piece of equipment and follow all possible safety measures. This video is for entertainment purposes only.