#subaru #forester #subaruforester #sgforester #subaruforester2.5xs #keyfob #programming




Instructions:

1. Sit in the driver's seat and ensure all doors are closed but unlocked.
2. Open and immediately close the driver's side door.
3. Quickly insert the key into the ignition and cycle it between the on and off positions, aiming for cycles of less than 1 second each. If the cycles are longer, the car will not enter programming mode.
4. After completing 10 on-off cycles, the car will honk to indicate it is in programming mode. If no honk occurs, check all doors. Remove the key and start over from step 2, ensuring your on-off cycling is fast enough.
5. Once the car honks, open and close the driver's side door.
6. Press the lock button on the remote.
7. Remove the key from the ignition. Your programming is complete.

I hope this helps! Let me know if you have any questions.

Product Link: https://www.ebay.com/itm/266542500663...