Step-by-step guide on programming Subaru keyless entry remote key fob. This will work on older generation Subaru Outback, Subaru Legacy, Subaru Forester, Subaru Tribeca. You don't need a scanner or diagnostic tool to do this, just a bit of patience. It might not work the first time you try it, but don't give up.

This keyfob reprogram process might seem a bit overwhelming once you first time see this video, but really it is not. For starters, you will need an 8 digit code which can be found on the back or inside your new Subaru key fob. Once you have the code, follow this procedure:

1. Open and close the door
2. Scroll the key in ignition lock 10 times (as shown in video)
3. Open and close door
4. Enter 8 digit key fob code manually using lock/unlock button on driver door (as shown in the video)
5. Enter the 8 digit code again
6. That's it. You just programmed new key fob to Subaru.

Give me your support and join the channel:
   / @quitealright  

Thanks for watching.
Don't forget to Like the video / SUBSCRIBE to the channel!

⚠ DISCLAIMER:
While QuiteAlright strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. The videos are intended for information only. Follow the manufactures repair procedure and use appropriate safety procedures. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. QuiteAlright is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.