Elecrow sent me this interesting device for review.
They call it "Pi Terminal-7” 1024*600 IPS HMI CM4 Panel All-In-One Module Raspberry Pi CM4 Industrial Computer With Rich Interfaces, 4G/LoRa/GPS/WiFi/BLE"
But how I'd describe it is a 7 inch touch screen with integrated Raspberry Pi Compute module (CM4) and a lot of hardware ports broken out.

Their description leans on it's ability as a Node Red terminal, and while it does come with Node Red server pre-installed, it can be used for many other touch screen control panel type applications.




Product page:
https://www.elecrow.com/pi-terminal-7...

More detail on the WIKI page:
https://www.elecrow.com/wiki/Pi-Termi...

User manual: https://www.elecrow.com/download/prod...

New users on the Elecrow website has a $20 PCB Assembly coupon
Become a new user: https://www.elecrow.com/customer/acco...
PCB Assembly page: https://www.elecrow.com/pcb-assembly....

Another Maker's Node Red playlist:    • Node-Red and MQTT  

In the video I mentioned I wasn't getting a commission for this (and at the time that was true), but after I recorded the video, they offered me a commission link, so if you want to buy one and you don't mind me earning a small commission, here's that link: https://pileofstuff.ca/r/l080g
Otherwise you can also choose to buy through the first link above.
-----
My tip jar:   / pileofstuff  

My other tip jar (channel membership) :    / @pileofstuff  

Buy me a coffee (or a beer): https://ko-fi.com/pileofstuff

If you are OK with me getting a commission on your purchases, feel free to use my affiliate links:
Ebay: https://ebay.to/33IF7PA
Banggood: http://pileofstuff.ca/r/9ajsf

Some other links to products may be affiliate links

https://odysee.com/@pileofstuff
#ElectronicsCreators
-----
This isn't the only way to do it.
It's probably not the best way to do it.
But it's how I did it.