Published On Nov 16, 2018
In this video we are going to do a DIY Fire pit picnic table with strictly 2X4s for lumbar.
Cut list
(2) 48 3/32”- goes underneath the bench tops
(7) 68 31/32”- goes in the middle of the bench tops and the table tops
(6) 77 5/32” - long side of the bench top and table top – 45 degrees not parallel
(8) 16 29/32” - legs
(4) 28 3/32” - table top brace - 53.5 degrees not parallel
(8) 11 21/32” - bench top brace - 65.5 degrees not parallel
(4) 11 21/32” - short side of the bench top – 45 degrees not parallel
(2) 28 3/32” - short side of the table top – 45 degrees not parallel
(4) 63” – attaches to the legs horizontally
(4) 36 12/32” – table top x legs – 51 degrees parallel
(2) 48” – holds the fire pit
(2)36” – attaches at a 90 degree angle to the fire pit holder
Materials list
https://www.homedepot.com/p/2-in-x-4-...
(24) ¼” x 6” carriage bolts
https://www.homedepot.com/p/Everbilt-...
(24) ¼” bolts
https://www.homedepot.com/p/1-4-in-20...
(48) 5/16”x 1 ½ washers
https://www.homedepot.com/p/Everbilt-...
(1) Fire pit hose
https://www.amazon.com/gp/product/B07...
(1) Fire pit
https://www.amazon.com/gp/product/B07...
(2) Aluminum flat bar
https://www.lowes.com/pd/Hillman-3-ft... Flat-Bar/3030928
( 1 ) brass fitting
https://www.lowes.com/pd/B-K-1-2-in-T...
( 2) flat brace
https://www.lowes.com/pd/National-Har...