A few weeks ago I got the L2 24W diode laser from Atezr and was curious if such a laser can only work with wood or also some serious material like metal.

So i pushed it to the limits while cutting and color engraving hardened steel and finally got a little custom radius gauge.
For this project i used the Atezr L2 24W diode laser, my lathe, the emco mill, the drill press and some other machines. And i killed an expensive carbide end mill ;)

0:00 Unboxing and preparing
4:35 Start of the main project

The following links are affiliate links, if you buy something via them, i earn a commission, you pay the same, not more:

Atezr shop:
http://atezr.com/referral/randomtechn...

The Atezr L2 24W Laser:
https://atezr.com/products/atezr-l2-2...

https://www.amazon.de/dp/B0C5HCS48B?r...

The foldable AS Enclosure:
https://atezr.com/products/atezr-as-f...

The stronger 36W Laser:
https://atezr.com/products/atezr-l2-3...