Purchase links for SCULPFUN iCube
▷Geek buying:
https://www.geekbuying.com/item/SCULP...

▷Allegro 3W (Poland): https://allegro.pl/oferta/14510757100
▷Allegro 5W (Poland): https://allegro.pl/oferta/14510996297

▷SCULPFUN Official Web: https://bit.ly/3M1P4Qe

▷Shopee: https://th.xiapibuy.com/product/84862...

▷Aliexpress: https://www.aliexpress.com/item/10050...

▷tomtop 5W: https://www.tomtop.com/p-os7236eu.html
▷tomtop 3W: https://www.tomtop.com/p-os7235eu.html

▷Amazon 5W: https://www.amazon.de/dp/B0CMXJCZY8

--
🔎 iCube Q&A 🔎

1️⃣ Why can’t my iCube connect to Wifi? When I try to get an IP address, nothing happens; when I try to connect to my home Wifi, I get a confirmation but can't connect

-Please only choose one software to connect. Don't open multiple software on the computer at the same time (for example: light burn, laserGRBL, Sculpfun Laser Tool, etc.). Multiple softwares are opening at the same time will cause a connection error or failure,in this situation ,you need to restarte the machine and replug the data cable.
How to get an IP address:
① Re-plug and unplug the USB data cable on the computer;
② Open "Sculpfun Laser Tool" on your computer and click "WIFI Configurtion Tool";
③ Select the correct COM serial port to connect (if you are not sure what your serial port is, you can check the "CH340 serial port" in the "Device Manager" of your computer);
④ Enter the Wifi name and password, click "Connect Wifi", and click "Get IP" to obtain the address (note: only supports Wifi with 2.4G frequency).
How to connect to home Wifi:
① Check whether your mobile phone and computer are in the same LAN and connected to the same Wifi (Note: If the mobile phone and computer are not in the same LAN or do not use the same Wifi, the connection cannot be made);
② Enter the IP address on "Sculpfun Laser Tool" to connect successfully. If you need web control, please enter the IP address on the web page to enter the web control page.
Please pay attention that if the network is not good or you are in an area with a lot of signal interference, high PIN ,then command may be delayed.

2️⃣ Why can't I connect to my home Wifi

-First, please make sure the frequency of the Wifi you want to connect to, iCube only supports connecting to 2.4G Hz Wifi; secondly, you need to check whether your home Wifi password contains special symbols (% * & / @ ! ..). If your Wifi password contains special symbols, please change your password, otherwise the software will regard the special symbols as certain commands when using GRBL/LightBurn, which will cause the engraving machine to malfunction.

3️⃣ How to connect to iCube using AP Wifi mode? What are the advantages and disadvantages of using AP Wifi mode?

-The connection steps are as follows:
① The machine defaults to AP wifi mode when it leaves the factory. The machine will automatically transmit Wifi after it is turned on;
② Connect to the machine Wifi through your mobile phone. The Wifi name is "SculpFun iCube XXX" and the default password is: 12345678;
③ Enter the default IP address “192.168.4.1” in SculpFun APP to connect to the APP.
Advantages: After connecting, the IP address will always be fixed as "192.168.4.1", and there is no need to query the machine's IP address anymore.
Disadvantages: Since the machine itself emits Wifi, the connected device will not be able to access the Internet during operation.

4️⃣ How to connect to iCube using Wifi mode? What are the advantages and disadvantages of using Wifi mode?

-The connection steps are as follows:
① When using it for the first time, the machine needs to be connected to the computer using a data cable;
② Open the Sculpfun homepage on your computer, download the Sculpfun Laser Tool configuration software, and click "WIFI Configurtion Tool";
③ Enter the name and password of your home Wifi on the software (Note: Please make sure the Wifi frequency you want to connect to, iCube only supports Wifi at the 2.4G Hz frequency; you need to check whether your home Wifi password contains special symbols (% * & / @ ! ..) If your Wifi password contains special symbols, please change your password, otherwise the software will regard the special symbols as some kind of command when using GRBL/LightBurn, which will cause the engraving machine to malfunction.);
④ After the machine is connected to Wifi, click "Get IP" in the software to obtain the current IP address;
⑤ Enter the queried IP address in Sculpfun APP to connect.
Advantages: While operating the machine, the connected device is not restricted by the network and can access the Internet normally.
Disadvantages: The IP address may change every time you turn on the phone, and you need to re-insert the data cable to obtain the IP address. You can avoid this problem by binding the IP address in the background of the router.


#sculpfun
#sculpfunicube
#stepbystep
#laserengraver
#sculpfundesktoplaser