I thought I would have had the fuselage glued together by now, but I came across a few issues. Fortunately, I discovered these before I had glued the two halves together. One issue is that the flaps moved in opposite directions. My solution was to remove one of the servos and install it in the other direction. Another issue was that my CG seemed like it was going to be too far forward without the ability to move it enough. To help with this, I made room for the FPV battery in between the two tubes for inserting the wing screws. I also organized the cables so they run above the wings, labeled everything, and mounted the ESC with Velcro.