Happy New Year Fixer Family!! I am so excited to share this project with you! I have wanted to do this for so long & I am so glad I finally did this. I am also excited to be sharing this with you!! This project is really a simple build. I know you will love it as well!! Below I have all the supplies listed for you as well as the cuts on your wood that you will need!! So lets get busy.....

Keep Lookin Up Cause That's Where It All Is!

Supply List:
Measuring tape
Pencil
Miter saw
Wood clamps
Nail gun – I use a Ryobi Nail gun
Drill (if you want to use screws instead of nails)
2 – 2 x 2 x 8 (large lantern)
1 – 1 x 4 x 6 (large lantern)
2 inch 18G brad nails
1 1/4 inch 18G brad nails
Wood glue
Wood filler – I use Elmer’s Wood Filler in Natural
Sander or sand paper
Paint (if you are painting)
Wood stain (Rustoleum Gel Stain)
Sealer (if using outside)

Cuts for wood:
4 – 2 x 2s cut at 21 1/2 inches (vertical side supports)
8 – 2 x 2s cut at 7 1/2 inches (horizontal top and bottom supports)
4 – 2 x 2s cut at 1 1/2 inches (feet)
3 – 1 x 4s cut at 10 1/2 inches (bottom)
2 – 2 x 2s cut at 9 inches (long pieces of crown)
2 – 2 x 2s cut at 6 inches (short pieces of crown)

*********************************
CONNECT*WITH*ME
😁FACEBOOK:   / fixintoal​  

📸INSTAGRAM:   / fixintoal​  

🐥TWITTER:   / fixintoal  

​💌EMAIL: [email protected]
******************************