I spent time with renowned tool maker Nic Westermann of ‘Hewn & Hone’ at his workshop in rural Wales

=============================================================================

Materials used and referenced in this video:

Stropping - https://www.hewnandhone.co.uk/product...

Abrasives - https://www.hewnandhone.co.uk/product...

=============================================================================

Connect with Nic using the links below:

Nic Website - https://www.hewnandhone.co.uk

Nic Instagram -   / hewnandhone  

=============================================================================

The other videos I filmed with Nic Westermann:

Nic Westermann - Important updates, Ordering tools, Waiting list, Etc -    • Nic Westermann - Important updates, O...  

Hewn & Hone - Introduction by Nic Westermann -    • Hewn & Hone - Introduction by Nic Wes...  

[Step by Step] Build A Two & Half Brick Forge - Nic Westermann -    • [Step by Step] Build A Two & Half Bri...  

(Pt 1/5) How To Make A Turning Sloyd Knife - Forging, Annealing & Rough Shaping -    • {Pt 1/5} How To Make A Turning Sloyd ...  

(Pt 2/5) How To Make A Turning Sloyd Knife - Heat Treat -    • {Pt 2/5} How To Make A Turning Sloyd ...  

(Pt 3/5) How To Make A Turning Sloyd Knife - Establishing Profile & Grinding Bevel -    • {Pt 3/5} How To Make A Turning Sloyd ...  

(Pt 4/5) How To Make A Turning Sloyd Knife - Handle Making & Fitting -    • {Pt 4/5} How To Make A Turning Sloyd ...  

(Pt 5/5) How To Make A Turning Sloyd Knife - Sharpening & Maintenance -    • {Pt 5/5} How To Make A Turning Sloyd ...  

Spoon Knife Edge Geometry -    • Spoon Knife Edge Geometry Explained -...  

How To Sharpen A Spoon/Hook Knife & Twca Cam - *THIS VIDEO YOU ARE WATCHING*

How To Make A Kolrosing Knife From An Old Drill Bit -    • How To Make A Kolrosing Knife From An...  

How To Hollow Grind & Sharpen A Sloyd Knife -    • How To Hollow Grind & Sharpen A Sloyd...  

=============================================================================

Below is a timestamp of all the sections in this video:

(Click on the time on the left to go straight to that section)

00:00:00 - Start
00:00:09 - Intro
00:02:38 - Spoon knife edge geometry
00:05:35 - Temporary handle
00:06:18 - What is a twca cam
00:08:21 - 600 grit diamond film
00:10:55 - 3,000 grit diamond film
00:11:58 - Damaged blade
00:13:22 - 3,000 grit diamond film
00:13:47 - Removing burr
00:16:28 - 14,000 grit diamond film
00:17:10 - Strop burr
00:17:49 - Easier to sharpen
00:18:19 - Different bevels
00:20:04 - Rod diameter
00:21:10 - Hewn & hone
00:22:55 - How often should you sharpen
00:25:13 - Storing tools after carving
00:27:06 - Conclusion
00:30:50 - Outro

=================================

As always I appreciate you watching

Take care

Peace

Zed

#spoonknife #sharpening #twca