How to Replace Front Lower Ball Joint 2001-2007 Volvo V70
TRQ TRQ
543K subscribers
28,020 views
280

 Published On Oct 31, 2022

Buy Now!
New Ball Joint from 1AAuto.com http://1aau.to/ia/1ASBJ00114
New Ball Joint Set from 1AAuto.com http://1aau.to/ib/1ASFK00627

This video shows you how to install a front lower ball joint on your 2001-2007 Volvo V70. Car and truck suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how.

This repair was done on a 2001 Volvo V70 X/C 2.4L Wagon 4-Door AWD Automatic and the process should be similar on the following vehicles:
2001 Volvo V70
2002 Volvo V70
2003 Volvo V70
2004 Volvo V70
2005 Volvo V70
2006 Volvo V70
2007 Volvo V70

Tools you will need:
• 18mm Wrench
• 13mm Socket http://1aau.to/oaXo/1AXAA00015
• 14mm Socket http://1aau.to/oaXo/1AXAA00015
• 18mm Socket
• 19mm Socket
• 1/2 Inch Impact Gun http://1aau.to/om3/1AXAA00252
• 3/8 Inch Impact Gun
• Torque Wrench http://1aau.to/oahE/1AXAA00044
• Anti-Seize Grease
• Brake Parts Cleaner
• Gloves http://1aau.to/ous/1AXSS00048
• Safety Glasses
• 6mm Hex Socket
• Chisel http://1aau.to/ojC/1AXAA00055
• Floor Jack http://1aau.to/oNg/1AXAA00068
• Hammer
• Jack Stands http://1aau.to/oKe/1AXAA00065
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Volvo V70 2001–2007 2nd Generation:    • Volvo V70 2001–2007 2nd Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

show more

Share/Embed