Printer design: Core XY
Build volume: 360×360×360 mm (14.17’’×14.17’’×14.17’’)
Printer dimensions: 800×800×900* mm (31.49’’ ×31.49’’× 35.43’’)* including side spoolholders and top enclosure cover (separate future add-on)
Filament diameter: 1.75mm, wide range of thermoplastics supported (including, but not limited to PLA, PETG, ASA, ABS, etc.)
Extruder: Planetary 1:10 gearbox with no-slip drive gear, Load Cell sensor
Tool Changer with up to 5 tool heads (optional upgrade via built-in expansion port)
Bed: Segmented heatbed with 16 individually controlled segments
Print surface: Removable magnetic steel sheets with different surface finishes
Electronics: 32-bit custom-made board with an expansion slot, single-cable communication with tool heads, network features, one-click printing
Mesh Bed Levelling: Load Cell-based fully automatic first layer calibration with no Live Z adjustment
Power panic: Hardware-based, single G-Code line accuracy
Ethernet connection: built-in; network connectivity not required for setup or operation
Wi-Fi module: built-in; network connectivity not required for setup or operation

https://all3dp.com/1/nextruder-prusa-...