In this video I'll walk you through step by step on how to build your own chicken coop with just a saw, tape measure, drill, staple gun, and grinder

Link to another coop design of mine as well
   • How to build a Chicken Coop the simpl...  

supplies needed is
16- 2x4x8
2-2x4x10
1- roll of welded wire 3ft x 50ft
6- 2ft x 8ft sheets of tin (sides and roof)
2- 2ft x 6ft sheets of tin (back)
1- box of #9 x 3 inch screws (72 Count) (2 boxes if you dont use the pocket screws option)
1- box of 2.5 inch pocket Screws
2- door hinges
1- box of 9/16 inch staples
1- 50 count box of woodtite fastener screws (for holding the tin on)

cut lengths
4- 7.5 ft part of top and bottom main frame
4-57 inch make from the 2x4x10, these go with the 7.5ft to make your top and bottom frame
2-87 inch your center horizontal side boards
1-57 inch for your top center board going from one side to the other to support the tin
5-65 inch for your 4 legs and door frame
1-53 inch for the center back board horizontal
2-53.5 inches for the door
3- 16.5 inches for the door
1-24 inches for the brace under the door horizontal
1-25.25 inches for the center brace to the right of the door horizontal
3-30.75 inches for the sides and back wall upper half going vertical
1-32 inch for blocking door from opening inward
1-57 inch for perch ( I place mine 24 inch from the back wall)