Buy Now!
New Control Arm from 1AAuto.com http://1aau.to/ib/1ASLF00836

This video shows you how to install new control arms from TRQ on your 2014-2019 Toyota Highlander. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear. When those bushings run out, that can have a negative impact on the ride and safety of your vehicle.

This process should be similar on the following vehicles:
2014 Toyota Highlander
2015 Toyota Highlander
2016 Toyota Highlander
2017 Toyota Highlander
2018 Toyota Highlander
2019 Toyota Highlander

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/obpt/1AXAA00013
• Pry Bar http://1aau.to/oWw/1AXAA00020
• 19mm Wrench http://1aau.to/oYD/1AXAA00010
• 10mm Socket http://1aau.to/obhi/1AXAA00017
• 14mm Deep Socket
• 14mm Socket http://1aau.to/obB4/1AXAA00015
• 17mm Socket http://1aau.to/obB4/1AXAA00015
• 19mm Socket http://1aau.to/oama/1AXAA00043
• 21mm Socket http://1aau.to/oama/1AXAA00043
• Dead Blow Hammer http://1aau.to/oWn/1AXAA00091
• Circlip Pliers
• Ratchet http://1aau.to/obGv/1AXAA00016
• Torque Wrench http://1aau.to/oaKx/1AXAA00044
• Copper Anti-Seize
• Gloves http://1aau.to/oaiE/1AXSS00048
• Liquid Thread Locker
• Safety Glasses http://1aau.to/oabx/1AXAA00343
• Floor Jack http://1aau.to/o9X/1AXAA00068
• Jack Stands http://1aau.to/oXb/1AXAA00065
• Pick http://1aau.to/oRN/1AXAA00037
• Pole Jack
• Punch
• Wheel Chocks
• Wire Brush http://1aau.to/otQ/1AXAA00079

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.