Build a cheap vacuum plate yourself without a vacuum pump, just with compressed air. Today we look at how to create a vacuum from compressed air. You only need a small pneumatic ejector that is connected to the compressed air. Will the vacuum plate hold properly?
#vacuum #vacuum plate #vacuum table #compressed air #CNC #CNC vacuum plate
CNC vacuum plate - vacuum plate - grinding device - compressed air -

👉 Attention: The vacuum suction nozzle in the video must be operated at 4.5 bar - forgot to say.
The multiplex plate also had 18mm no 12mm. ;-)

👉* Vacuum suction nozzle 6mm: https://amzn.to/3EVU3il
👉* Vacuum suction nozzle 6mm other supplier: https://amzn.to/3gsYacq
👉* Here's another one: https://amzn.to/3iguaRs
👉* Another manufacturer: https://amzn.to/3uqoyah
👉* More expensive: https://amzn.to/3UdE4Rg
Here is the data sheet: https://www.smcpneumatics.com/pdfs/ZU...
👉* Vacuum suction nozzle expensive: https://amzn.to/3gwY6s2
👉* Pneumatic hose: https://amzn.to/3ADFZHR
👉* Push-in fitting pneumatics: https://amzn.to/3Eyzves
👉* Stopcock with 6mm: https://amzn.to/3EEh3RM
👉* Compressed air coupling plug grommet hose connection 4mm: https://amzn.to/3guXC5G
👉* Y connector 6mm: https://amzn.to/3XsWgJq
👉* Round cord EPDM foam rubber: https://amzn.to/3hW3WU2
👉* Multiplex cut 18mm: https://amzn.to/3XqgWla
👉* Superglue + Activator : https://amzn.to/3gppI2l
👉* Marking ruler : https://amzn.to/3KZbTBL
👉* Screw-in sleeve: https://amzn.to/3O8GfUu
👉* Screw-in sleeve set: https://amzn.to/3Gkj2NA
👉* Wood glue Titebond: https://amzn.to/3y0tIKZ
👉* Acrylic spray transparent matt: https://amzn.to/3EUFIm5

👉* Finished vacuum chuck: https://amzn.to/3hXHeee


👌👌 You can send a thank you here: https://www.paypal.com/paypalme/gipfe... 👌👌

All links with "*" are Amazon affiliate links.

👌 You don't want to miss anything anymore? Then leave a subscription https://bit.ly/2sQHbHC 👌
SUBSCRIBE IS FREE


If you want to send a thank you to Summit Wood...
here is the wish list:
👉 https://amzn.eu/0zDkkpH