Parts list below description. Please use the links, I'll get some commission and I found good deals! Motor on top for attention lol.

Rocket z 3500 with 3s esc
https://s.click.aliexpress.com/e/_mre...

I built the ‪@zeusgarage4368‬ ZRD-1 chassis and slapped a 1/25 scale MKii Supra body onto it. OFC I had to paint the Supra the same color as my Grandma's 87 Camry Wagon that she called "Jesse."
This was my first RWD RC Drift build, I've already built a second one for my kid. The first build was slow, thoroughly watching through the build video instruction. The second build was a breeze. After understanding the function of each feature on each part, I just knew which drill size and hardware size to use.
I would 100% redesign or modify some of these parts if I had access to the part files in solidworks. ‪@zeusgarage4368‬ my guy, I'd love the build files in Solidworks or .xt!

Zeus' build video, has links to the chassis part downloads there
   • 3D printed 1/24 RWD drift car full bu...  

RX / GYRO combo for FlySky NB4 tx (Transmitter link at bottom)
https://s.click.aliexpress.com/e/_mN2...

Steering Servo (Get Brass) - This is the cheapest one you can get, definitely recommend an upgrade but that's on you to decide.
https://s.click.aliexpress.com/e/_mtQ...

K9 diff cups and bearings (You'll scavenge the diff cups, these get m2 thread thru and trim neck to 4mm) This is way better than printing cups
https://s.click.aliexpress.com/e/_mtl...

Spring 1 10mm .4mm wire 5 OD, 10 L
https://s.click.aliexpress.com/e/_mOv...

Spring 2 .4mm wire 6 od, 20 L
https://s.click.aliexpress.com/e/_mMA...

K9 drive axles (2 of these will be disassembled and ground to 3.6mm OD for front)
https://s.click.aliexpress.com/e/_mth...

K9 bearing set x5 still need trans bearing
https://s.click.aliexpress.com/e/_mND...

Transmission bearings 2 x 5 x 2.5
https://s.click.aliexpress.com/e/_mOG...

M2 ball links either length (These get drilled deep as poss with 1.6mm then you clip them down to 11.5mm anyway)
https://s.click.aliexpress.com/e/_mrF...
https://s.click.aliexpress.com/e/_mLf...

Countersunk m2
https://s.click.aliexpress.com/e/_mNk...

Socket head and countersunk m2
https://s.click.aliexpress.com/e/_mLL...

m2 flat top screw set
https://www.amazon.com/dp/B07HG2RNZF?...

m2 threaded rod
https://s.click.aliexpress.com/e/_mK2...

2mm rod
https://s.click.aliexpress.com/e/_m0m...

3s 300mah battery
https://s.click.aliexpress.com/e/_mM5...

Xt30 pigtail to adapt esc
https://s.click.aliexpress.com/e/_mPX...

Gear Set (Will use 32t x 2, 18t, and 10t from this set) Side note on gears, I doubled up the 32t gears on the diff because it ground through the 18t gears. It took forever to get these parts individually so this kit is nice, even though it only contains 2x of each of the gears you need and you'll be stuck with a bunch of excess for future builds I guess.
https://www.amazon.com/dp/B07DL1SSKV?...

Hand drill (You need 1.5 thru 2.2 mm bits)
https://s.click.aliexpress.com/e/_mK1...

m2 x 0.4 tap
https://s.click.aliexpress.com/e/_mLj...

Magnets for body mount
https://www.amazon.com/dp/B09Y8D5Z9M?...

Transmitter - FlySky NB4+ (Highly recommended over any cheap transmitters) (DUMBO RC ELECTRONICS NOT RECOMMENDED, THIS CHASSIS WAS AWFUL WITH THOSE AND I UPGRADED)
https://s.click.aliexpress.com/e/_mtY...