Here is the process I used:

🌿 Fully Scraped and Sanded to remove all the finish
🌿Sanded with 3M Xtract Abrassive, 120 grit followed by 150 grit then wiped with Acetone
🌿1 coat stain / General Finishes Gel stain
🌿 2 coats mohawk vinyl EZ Sealer
🌿 1 coat Glaze
🌿1 coat Toner
🌿3 coats Lacquer Satin
🌿****Sanded 400 grit between all coats
🌿Brass hardware low boiled water dish soap and vinegar, scrubbed with green pad and barkeepers friend
🌿Metal shields sprayed with Rustoleum gold spray

Links to proficys here:
https://urlgeni.us/amzn/cherrydressers


Timecodes
0:00 Intro
0:22 Removing furniture finish on solid wood
1:15 Wiping down your furniture with Acetone
1:36 Staining with gel stain
2:03 Applying Vinyl Sealer How and Why
2:24 How and why to apply Glaze on your furniture refinish
3:52 How and why to use toner on your furniture refinish
4:37 Applying Pre-Cat Lacquer on your furniture restoration

Find me on Instagram :

https://www.instagram.com/purposely_r...