I built this simple one sheet plywood bookshelf using a single sheet of 3/4" plywood, some 2x2 scraps and a half sheet of 1/4" plywood for the back...but the back is optional, so you can skip the 1/4" plywood if you want ;)

This project was sponsored by Build Something and came together super easily using a Kreg pocket hole jig and pocket hole screws. I filled the pocket holes using pocket hole plugs and left these shelves unfinished.

You'll have some leftover plywood to make additional shelves with OR to save for your next project. I'm sharing the free printable plans over on BuildSomething.com here:
https://www.buildsomething.com/plans/...
And I'm sharing more details over on the blog here:
https://www.woodshopdiaries.com/one-s...