STL's and links: https://fpfdesigns.com/

My starting GCODE (for OrcaSlicer):
---------------------------------------------------------
;ELEGOO NEPTUNE 4 MAX
M220 S100 ;Set the feed speed to 100%
M221 S100 ;Set the flow rate to 100%
M104 S140 ;set nozzle to 140C, but don't wait for it
M190 S[bed_temperature_initial_layer_single] ;set bed temp and wait for it
G4 P1500000; wait 25 minutes for the bed temp to stabilize further
G29 ;auto bed-leveling
G90 ;absolute positioning
G1 Z10 F300
G1 X1.5 Y10 F6000
G1 Z0 F300
M109 S[nozzle_temperature_initial_layer]
G92 E0 ;Reset Extruder
G1 X1.5 Y10 Z0.4 F300 ;Move to purge start position
G1 Y110 E30 F400 ;Draw purge line
G1 Z0.6 F120.0 ;Move up a little
G1 Y105 F3000
G92 E0 ;Reset Extruder
---------------------------------------------------------
My N4Max Orca Profile: https://fpfdesigns.com/software/N4Max...
N4 Camera Mount:    • 3D Printed Camera Mount for Neptune 4...  

Outro music is "Quantum" by "Vapora", used with explicit permission from the artist.    • Quantum  

New videos published every Friday, featuring a new 3D printed functional object, how I use it, and design considerations.

The work depicted in this video is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License or other non-commercial license.

elegoo
n4max
n4m
overextrusion
underextrusion
gcode
fixed
layer shift
orca slicer
heatbed
saturation
dial indicator
klipper
functional
print
fpf
PLA