Published On Jul 19, 2018
Sony Cybershot RX100 mark 1.
Use a JIS00 crosshead screw driver to take off the button plastic cover then unscrew the 5 screw's on the side and open the camera from the back, take care of the little speaker and the 2 thin black and red wire, and specially TAKE CARE of the small blue flex cable and just take it out, it's NOT necessary to take off the other flex cable's .
GENTLY peel off most of the black tape from the sensor board BUT TAKE CARE of the flex cable's !!!
unscrew the 3 screw's and turn the sensor over so you have full access to clean with "Eclipse" and lens tissue or a "Visible Dust".
Here are some link's to different repair tool's:
Contact glue:
https://www.loctiteproducts.com/en/pr...
Japan Hobby Tool rubber cone:
https://www.amazon.com/Japan-Vacuum-C...
18 different size rubber repair tool's:
https://www.amazon.com/Sizes-Lens-Fil...
You can also buy this set.
Lens Repair Set with pointed, flat, half flat tips:
https://www.amazon.com/dp/B00QRPWCN0/...
JIS cross head screw driver's:
https://www.amazon.com/Moody-Tools-58...
Or this set, that is the set I use:
https://eustore.ifixit.com/en/Tools/D...
Lens cleaning wipes (PEC-PAD):
https://www.amazon.com/dp/B0161VIZZ8/...
Thin Cotton Buds x 200 you can buy them here:
https://www.muji.eu/pages/online.asp?...
DSLRKIT Pro Lens Vise Tool Repair Filter Ring Ajustment Steel 27mm to 130mm:
https://www.amazon.com/DSLRKIT-Repair...
Japan Hobby Tool Helical Grease Made in Japan:
https://www.amazon.com/Japan-Hobby-He...
Loctite 222 50ml Threadlocker
https://www.amazon.com/Henkel-Loctite...