Instructions for applying self-adhesive sealing wax medallions to bottles. For the correct application of sealing wax medallions, they must be at a warm temperature so that they are more flexible and prevent them from breaking when placed. The steps to follow are:

1.- Place the medallions on a tray. Make sure they are face up and do not touch each other.

2.- You can use a preheated low temperature oven or dehydrator. You can also put them in direct sunlight and in any case check them every minute until you see that they are slightly warm and flexible (1 to 3 minutes maximum). If you heat them too much they can melt or get damaged, so you must be very aware of the warming time.

3.- Once these are at the correct temperature, you can stick them to your bottle by peealing the waxed paper, placing the medallion on the bottle and pressing with your fingers so that the adhesive is activated. Once the medallion is well adhered to your bottle, it resists low temperatures and ice. The medallions are more sensitive to heat, so it is not recommended to leave the bottles stored in a very hot or sunny place, because the sealing wax medallions can soften at high temperatures.
More information at https://www.seal-wax.com/sealing-wax-...