When we include ‘high security disarm’ feature to our aftermarket alarm & immobiliser it provides a second layer of protection to help secure the vehicle against theft by stolen key or key clone.

Our security will arm by simply pressing the lock button on the factory remote but will NOT disarm unless the small driver recognition card is in close proximity.

After 20/30 seconds of unlocking with the factory remote, if the wireless signal from the card is not detected the alarm will sound.
While the system is ‘searching’ for the signal from the card, the vehicle remains immobilised.

If the owner looses the card or the cards internal CR2032 battery is flat a unique 4 digit pin code needs to be entered via the emergency over ride panel on the dashboard.

The cards are designed to be short range so need to be in close proximity to the vehicle to enable the ‘wireless disarm handshake’ with the security system.

Once disarmed, the card does not need to be ‘seen’ by the system again until the next un-lock cycle.

If range depletes resulting in the system not disarming use the emergency over ride pin code procedure & replace the cards internal battery as soon as possible.
(No programming required)

For further information on this or any other of our vehicle security solutions please call 03300100506