Looking for additional Camber and Caster Adjustments on your 12-19 Porsche 991, or 2012 and up Boxster and Cayman, then our Offset Camber plates are the answer you're looking for.

Our offset front camber plates allow for additional camber and caster over the factory range of adjustment, similar to the GT3 geometry. These camber plates fit original factory-type struts, including those equipped with PASM.
Made from solid aluminum and anodized for protection These plates use high-strength hardened steel spherical bearings and are direct replacements for the factory plates which use compliant rubber bushings. The Teflon-lined spherical bearings used in our kit are entirely maintenance-free and require no supplemental lubrication. These plates are weather-resistant to prevent contamination from water or grime, extending bearing life. Coilover-equipped cars will utilize the included seat bearing kit and 2.25" to 2.5" spring adapter. This makes the Elephant Racing camber plate kit perfect for regular street use, as well as extended use on the race track.

Spherical bearings further improve performance because they pivot freely, but eliminate the deflection that is inherent with the factory rubber bushings. This is important for two reasons:

1. The factory rubber acts as a spring in series with the strut. This rubber spring-action is completely un-damped and reduces the struts ability to control the tire contact patch. The spherical bearing allows the strut damper to do its job and control the contact patch.

2. The factory rubber deflects sideways under cornering loads, causing loss of camber just when you need it most. Our spherical bearings eliminate the deflection, maintaining stable and predictable camber.

Available as a direct bolt-on for factory springs, lowering springs, and Coilover equipped cars for 12-19 Porsche 991, and 2012 and up Boxsters and Caymans.

https://www.elephantracing.com/porsch...