Please click "Show More" for links and more information.

Please visit https://www.horizonhobby.com/product/... for more information on the TLR 22 5.0 DC Roller.

Assembled to our TLR Race Team’s Factory Specifications, the Team Losi Racing® 22 5.0 DC Race Roller: 1/10 2wd Buggy will get any racer off on the right foot and competing for podiums quickly! Factory built and pre-assembled as a Race Roller chassis, new drivers can start racing in less time. Just add your preferred electronics, tires, and paint to make this Race Roller as unique as you. The 22 5.0 DC Race Roller has a combination of features second-to-none including low maintenance gear differential, G3 12mm big bore shocks, revamped steering geometry, and so much more. No matter if the terrain is dirt or clay, the 22 5.0 DC Race Roller is at home on the racetrack and poised for the podium.

Race Roller
Factory Built as a Race Roller Chassis, just install the electronics, mount preferred tires, paint the body and the 22 5.0 DC Race Roller will be ready to hit the track and collect podium finishes!

Low Maintenance Gear Differential
Optimized for reduced maintenance, the 22 5.0 DC Race Roller includes TLR's metal version gear differential which is supremely reliable and uses silicone fluid to tune performance.

All New Rear Hubs and Inner Rear Pivots
As track surfaces and setups have evolved, the need for more adjustment in the rear suspension has become exceeding apparent. The 22 5.0 DC Race Roller includes Inner Rear Pivots with roll center, track width, anti-squat and toe adjustment paired with the Variable Height Axle (VHA) rear hubs which also give more roll center and axle height adjustment. This is the most adjustable rear suspension TLR has ever produced.

G3 12mm Big Bore Shocks
The G3 shocks give the 22 5.0 plush handling and consistent, leak-free bleed as the Gen II shocks, but with some long-anticipated ease of use improvements. No more e-clips as the pistons are now secured by screws, new shock caps and shock bodies increase the spring collar height by 3mm to accommodate lower ride heights, new eyelets and spring cups provide -3mm, 0mm and +4mm spring cup off-sets.

Revamped Steering Geometry
The 22 5.0 is the best driving 2wd buggy Team Losi Racing has ever created, and the biggest improvement comes from the steering geometry. Increasing the length of the steering bell cranks and spindle arms, along with changes to the Ackermann angle gives the 22 5.0 a significantly smoother steering feel, especially off-center and high speed, while increase low-speed steering for tighter tracks and 180's.

Super Heavy Duty Slipper (SHDS)
The slipper is optimized with all new slipper plates, slipper pads, spring, spur gears, and an all new top shaft. The new top shaft uses a sturdy M4 lock nut, the new slipper pads allow for spur gears sized 69T to 81T, reduced slipper pad area provides a more linear slip through the throttle application, and thicker slipper plate keep consistent pressure across the surface of the slipper pads.

22 5.0 Body
Maintaining the excellent balance, grip, and stability of the 22 4.0 body, with a similar styling, the 22 5.0 body is pulled from 0.8mm polycarbonate plate for a lightweight body that still has fantastic durability. As with all TLR bodies, the 5.0 body is precut and also clear with the Race Roller, ready for the choice of paint.

Diff Height Adjustment
The 22 4.0 included diff height adjustments including 0 and +3.5mm settings. The 22 5.0 DC includes 0mm, +1mm, +1.75mm, +2.5mm, and +3.5mm diff heights to optimize bone plunge for different axle heights, ride heights, and grip levels.

Front Roll Center Adjustment
The 22 5.0 includes the standard Low Roll Center (LRC) composite from pivot with both 2mm and 1mm thick front kick shims which allows for incremental adjustments. With the addition of the optional HRC front pivot, racers can run the Super Low Roll Center, Low Roll Center, Medium Roll Center, or High Roll Center, with a 3mm adjustment window.

FEATURES
➢ Pre-Assembled Race Roller
➢ Low Maintenance Gear Differential
➢ Adjustable Rear Hubs and Inner Rear Pivots
➢ G3 12mm Big Bore Shocks
➢ Revamped Steering Geometry
➢ Super Heavy Duty Slipper (SHDS)
➢ 2.0 Milled Aluminum Chassis
➢ 22 5.0 Body
➢ TLR Front Wing Included
➢ Diff Height Adjustment
➢ Front Roll Center Adjustment
➢ 3-position Front Camber Block
➢ New Battery Hold Down
➢ Optimized Composites
➢ TLR 6.5" Rear Wing
➢ Built-In Motor Fan Mount
➢ Laydown Configuration
➢ All Metric Hardware


Horizon Hobby is on Facebook! Visit us   / horizonhobby  

Follow HorizonHobby.com on Twitter:   / horizon_hobby  

Share your RC passion with Horizon Hobby on Instagram @Horizon_Hobby