Here are the links on Amazon:
Washer Rubber Seal: https://geni.us/Washer_Seal
Spring Removal Tool: https://geni.us/Spring_Removal_Tool

Today I finally replaced the washing machine door gasket and cleaned out the clogged drain which was causing the mold and staining. You can remove the mold from the seal by simply replacing the seal yourself! DON'T Remove the Front Panel!

You definitely need the spring removal tool to get this done, and it is cheap. Every other video on YouTube has you remove the top, control panel, and front panels. You can do this without removing any of those using my method here.

Let me know in the comments if you are going to try this!

Washer Door Gasket Replacement
00:00 - Introduction
01:55 - Step 0: Unplug the power
02:08 - Step 1: Remove Outer Band
03:01 - Step 2: Remove Outer Seal
04:01 - Step 3: Remove Inner Spring
05:27 - Step 4: Remove Lower Drain
08:39 - Step 5: Reinstall Drain
09:06 - Step 6: Reinstall Seal
09:34 - Step 7: Install Inner Spring
13:07 - Step 8: Reinstall Outer Spring


The above links are affiliated with Amazon and I receive a small commission when you use them. Thanks for supporting the channel!
Dan
dtdw @danholt.net