Buy Now!
New Tie Rod from 1AAuto.com http://1aau.to/ib/1ASTE00371

This video shows you how to install new TRQ outer tie rods on your 2003-2011 Honda Element. Outer tie rods, sometimes referred to as “tie rod ends,” connect the steering rack to the steering knuckle. Their joints can wear out over time, causing loose steering, vibrations, and uneven tire wear. They are also a common failure point in localities with safety inspections.

This process should be similar on the following vehicles:
2003 Honda Element
2004 Honda Element
2005 Honda Element
2006 Honda Element
2007 Honda Element
2008 Honda Element
2009 Honda Element
2010 Honda Element
2011 Honda Element

Tools you will need:
• 14mm Wrench http://1aau.to/oL2/1AXAA00010
• 19mm Wrench http://1aau.to/oL2/1AXAA00010
• 24mm Wrench
• 19mm Socket http://1aau.to/o3z/1AXAA00043
• Air Compressor
• Crowfoot Wrench
• Needle nose pliers http://1aau.to/oya/1AXAA00051
• Needle nose pliers http://1aau.to/oya/1AXAA00052
• 1/2 Inch Impact Gun http://1aau.to/onV/1AXAA00252
• Ratchet http://1aau.to/obgQ/1AXAA00016
• Torque Wrench http://1aau.to/oanA/1AXAA00044
• Gloves http://1aau.to/oA9/1AXSS00048
• Floor Jack http://1aau.to/oQZ/1AXAA00068
• Hammer http://1aau.to/oLV/1AXAA00091
• Jack Stands http://1aau.to/oLP/1AXAA00065
• Wheel Chocks

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.