How to Replace Front Brakes 2010-2013 Kia Forte Koup 2.4L L4
TRQ TRQ
519K subscribers
129 views
4

 Published On Sep 18, 2024

Buy Now!
New Brake Pads from 1AAuto.com http://1aau.to/ib/1ABPS02691
New Brake Rotor Set from 1AAuto.com http://1aau.to/ic/1APBR01095

This video shows you how to install new, quality TRQ brake pads and rotors on your 2010-2013 Kia Forte Koup 2.4L L4. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.

Estimated installation time for a professional technician is approximately: 54 minutes

This repair was done on a 2012 Kia Forte Koup SX 2.4L Coupe 2-Door FWD Automatic and the process should be similar on the following vehicles:
2010 Kia Forte Koup
2011 Kia Forte Koup
2012 Kia Forte Koup
2013 Kia Forte Koup

Tools you will need:
• Phillips Head Screwdriver http://1aau.to/obTo/1AXAA00013
• Pry Bar http://1aau.to/oagc/1AXAA00020
• 14mm Socket http://1aau.to/octp/1AXAA00015
• 17mm Socket http://1aau.to/octp/1AXAA00015
• 21mm Socket
• Brake Caliper Hanger http://1aau.to/ooE/1AXAA00439
• Trim Tool Set http://1aau.to/oaIy/1AXXX00006
• Socket Driver
• Socket Extensions http://1aau.to/octp/1AXAA00015
• Torque Wrench http://1aau.to/obur/1AXAA00044
• Copper Anti-Seize
• Paper Towels http://1aau.to/oWt/1AXSS00035
• Silicone Paste
• Hammer
• Jack Stands http://1aau.to/oay4/1AXAA00065
• Pick http://1aau.to/oabq/1AXAA00037
• Wheel Chocks
• Wire Brush http://1aau.to/oAV/1AXAA00079

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

show more

Share/Embed