CONDITION Function of T16D/T12D 
Hello, everyone. Today I’m going to introduce the condition function of RadioLink T16D/T12D transmitter. Take T12D as an example.
Press Mode button to enter MAIN MENU-- Advanced Settings-- CONDITIONS.
Up to three conditions can be set in a model. You can set the same or different switches for the conditions. When multiple switches are used to switch conditions. Condition 3 is greater than condition 2, which is greater than condition1
Enter the next setting page.
These functions can be controlled by using condition switches.
If you want to use condition switches to control any one of the functions, please turn on the corresponding functions, otherwise, the condition switches will not take effect.
For example: Throttle curve does not support switch control. If you want to assign a switch to control it, you can use condition function to achieve it.
I’ll show how to use one switch to control 3 different throttle curves
I set the switches of CONDITION 1/CONDITION 2/CONDITION 3 to SWC_UP/SWC_MID/SWC_DOWN ;
Turn on THROTTLE CURVE function on the CONDITION menu;
Enter Advanced menu-- throttle curve.
Push SWC up. It is condition 1. The top taskbar will also display the condition number. Condition 1. I set the EXP to -100.
Push SWC to the middle. It is condition 2. The condition number also shows condition 2 here. I set the EXP to 0.
Push SWC down. It is condition 3. Here is condition 3. I set the EXP to 100.
The setting is done. Let’s push SWC and check if it takes effect.
Push SWC up. The first throttle curve.
Push SWC to the middle. The second throttle curve.
Push SWC down. The third throttle curve.
When SWC condition switch is placed in different positions, the top taskbar will also display the condition number.
You can also use different switches to control it. All the functions listed here can be controlled by condition switch.

For more details of T16D, please refer to the link:
https://www.radiolink.com/t16d

For more details of T12D, please refer to the link:
https://www.radiolink.com/t12d

If any question about RadioLink products please feel free to contact us. Our email is: [email protected]

#transmitter #radiolink