Galaxy A25 Stuck On Logo Flash No Need Firmware Flash Tool Etc
Jame shirin tech Jame shirin tech
36K subscribers
122 views
0

 Published On Jun 16, 2024

The troubleshooting steps for a Galaxy A25 stuck on the logo are quite similar to those for the Galaxy A03. Here's a detailed guide on what you can do to resolve this issue:

1. Soft Reset
*Force Restart:*
- Press and hold the Power button and Volume Down button simultaneously for about 10-15 seconds until the device restarts.

2. Safe Mode
*Boot into Safe Mode:*
- Turn off the phone.
- Press and hold the Power button until the Samsung logo appears.
- Immediately release the Power button and press and hold the Volume Down button.
- Continue holding the Volume Down button until the device finishes restarting.
- Safe Mode will appear in the bottom-left corner. If the device boots up correctly in Safe Mode, a third-party app might be causing the problem. Uninstall recently installed apps.

3. Wipe Cache Partition
*Wipe Cache Partition:*
- Turn off the phone.
- Press and hold the Volume Up button and Power button simultaneously until the Samsung logo appears, then release all buttons.
- Use the Volume buttons to navigate to "Wipe Cache Partition" and the Power button to select it.
- Confirm by selecting "Yes."
- After the process is complete, select "Reboot System Now."

4. Factory Reset
*Factory Reset:*
*Note:* This will erase all data on the device.
- Turn off the phone.
- Press and hold the Volume Up button and Power button simultaneously until the Samsung logo appears, then release all buttons.
- Use the Volume buttons to navigate to "Wipe Data/Factory Reset" and the Power button to select it.
- Confirm by selecting "Yes."
- After the reset is complete, select "Reboot System Now."

5. Firmware Update or Reinstallation
*Reinstall Firmware (using Samsung Smart Switch or Odin):*
- Connect your phone to a computer and use Samsung Smart Switch to reinstall the firmware.
- If Smart Switch does not recognize your device, you may need to use Odin, a more advanced tool. Instructions for using Odin are more complex and typically require downloading the firmware manually from a trusted source like Sammobile.

6. Professional Assistance
If none of these steps resolve the issue, it may be necessary to seek professional repair services or visit a Samsung service center for further assistance.

show more

Share/Embed