INTRODUCTION
Heat engine:
A heat engine is a device which transforms the chemical energy of a fuel into thermal energy
and uses this energy to produce mechanical work. It is classified into two types-
(a) External combustion engine
(b) Internal combustion engine
External combustion engine:
In this engine, the products of combustion of air and fuel transfer heat to a second fluid which
is the working fluid of the cycle.
Examples:
*In the steam engine or a steam turbine plant, the heat of combustion is employed to generate
steam which is used in a piston engine (reciprocating type engine) or a turbine (rotary type
engine) for useful work.
*In a closed cycle gas turbine, the heat of combustion in an external furnace is transferred to
gas, usually air which the working fluid of the cycle.
Internal combustion engine:
In this engine, the combustion of air and fuels take place inside the cylinder and are used as
the direct motive force. It can be classified into the following types:
1. According to the basic engine design- (a) Reciprocating engine (Use of cylinder piston
arrangement), (b) Rotary engine (Use of turbine)
2. According to the type of fuel used- (a) Petrol engine, (b) diesel engine, (c) gas engine
(CNG, LPG), (d) Alcohol engine (ethanol, methanol etc)
3. According to the number of strokes per cycle- (a) Four stroke and (b) Two stroke engine
4. According to the method of igniting the fuel- (a) Spark ignition engine, (b) compression
ignition engine and (c) hot spot ignition engine
5. According to the working cycle- (a) Otto cycle (constant volume cycle) engine, (b) diesel
cycle (constant pressure cycle) engine, (c) dual combustion cycle (semi diesel cycle) engine.
6. According to the fuel supply and mixture preparation- (a) Carburetted type (fuel supplied
through the carburettor), (b) Injection type (fuel injected into inlet ports or inlet manifold,
fuel injected into the cylinder just before ignition).
7. According to the number of cylinder- (a) Single cylinder and (b) multi-cylinder engine
8. Method of cooling- water cooled or air cooled
9. Speed of the engine- Slow speed, medium speed and high speed engine
10. Cylinder arrangement-Vertical, horizontal, inline, V-type, radial, opposed cylinder or
piston engines.
11. Valve or port design and location- Overhead (I head), side valve (L head); in two stroke
engines: cross scavenging, loop scavenging, uniflow scavenging.
12. Method governing- Hit and miss governed engines, quantitatively governed engines and
qualitatively governed engine
14. Application- Automotive engines for land transport, marine engines for propulsion of
ships, aircraft engines for aircraft propulsion, industrial engines, prime movers for electrical
generators.
Comparison between external combustion engine and internal combustion engine:
Main components of reciprocating IC engines:
Cylinder:
Pressure: Temperature:
Materials:
Liner/Sleeve:
Cylinder head:
*Inlet & Exit Valve *Spark Plug * Injector/Fuel Valve/nozzle
*Cylinder block *Gasket
Piston:
Materials
Piston rings:
Materials:
Upper ring/ Compression Ring
Lower Ring/Oil ring
Connecting rod
Crankshaft
Crank case
Flywheel