Buy Now!
New Intake Manifold Gasket Set from 1AAuto.com http://1aau.to/ia/1AEGS00355

This video shows you how to install an intake manifold gasket set in your 2003-2007 Honda Accord 3.0L V6. Gaskets help seal joints between components in places where you don’t want air, or fluids leaking out of that seal. Rubber or silicone gaskets may dry out or harden over time, reducing their effectiveness.

This repair was done on a 2006 Honda Accord EX 3.0L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2003 Honda Accord
2004 Honda Accord
2005 Honda Accord
2006 Honda Accord
2007 Honda Accord

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/obNJ/1AXAA00013
• 10mm Socket http://1aau.to/obSk/1AXAA00017
• 12mm Socket http://1aau.to/ocj5/1AXAA00015
• Pliers
• Ratchet http://1aau.to/ocjP/1AXAA00016
• Torque Wrench http://1aau.to/obnx/1AXAA00044
• Cloth Rags http://1aau.to/oTb/1AXSS00035
• Gloves http://1aau.to/obq5/1AXSS00048
• Safety Glasses
• Razor Blade / Gasket Scraper

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.