00:00 Introduction
00:43 Davit Installation
10:38 Making the winch mount
13:04 Making holes through the bulkhead
15:05 Sanding
17:00 Cutting the fibreglass sheets
19:50 Lamination preparations
23:37 More sanding and expanding foam
24:14 GLASSING DISASTER!!!
27:49 What went wrong?
30:08 Reglassing the supports
34:36 Reenforcing the bulkhead and spacing the rollers
37:00 Working with West systems Epoxy tips
38:36 Fitting the rollers to the bulkhead
42:33 Sealing the bulkhead with Epoxy
44:26 Fitting the lower roller
46:13 Drilling more holes in the winch
46:50 Connecting the power and installation considerations
48:58 Screwing the winch down
50:07 The wiring
58:00 Testing the system
59:13 Firmware upgrade, callibration and testing
01:02:20 Missing fuse
01:03:04 Planning control panel install
01:05:24 Cutting the control panel hole
01:06:30 Mounting the control unit
01:09:28 Installing the ON/OFF switch
01:10:43 Final thoughts and improvements