Changing a saw blade for your Bosch GTS10J Professional Table saw may sound easy, but it is recommended that you read through the user manual or the easiest way by watching this video. A complete step by step guide to exchange your saw blade.

Removing the Saw Blade
• Turn the crank (19) clockwise as far as possible so that the saw blade (27) is in the highest possible position above the saw table.
• Open the clamping lever (39) and pull the protective cover (6) out of the groove on the riving knife (8).
• Use a screwdriver to lift the table insert (26) at the front and remove it from the tool chamber.
• Turn the clamping nut (49) using the ring spanner (23) while pulling the spindle locking lever (50) until it engages.
• Keep pulling the spindle locking lever and unscrew the clamping nut anticlockwise.
• Remove the clamping flange (51).
• Remove the saw blade (27).

Fitting the saw blade
If necessary, clean all the parts you want to fir before installing them.
• Place the new saw blade on the mounting flange (53) of the tool spindle (52).
Note: Use sufficiently large saw blades. The radial clearance between the saw blade and riving knife must not exceed 3-8mm (max).

When mounting the saw blade, ensure that the cutting direction of the teeth (direction of the arrow on the saw blade) matches the direction of the arrow on the riving knife.
• Fit the clamping flange (51) and the clamping nut (49).
• Turn the clamping nut (49) using the ring spanner (23) while pulling the spindle locking lever (50) until it engages.
• Tighten the clamping nut by turning it clockwise.
• Reinsert the table insert (26).
• Refit the protective cover (6).

Please be noted that work safety is the highest priority.


For more information, please visit www.ewarehouse.my - Malaysia's Largest Home Improvement Online Store.