This is the UPDATED instructions for the Epsilon+ WRC Wings, for GR Corolla and Corolla hatchbacks

Purchase the wing here! -
https://epsilon.plus/collections/gr-c...
Drill Template -
https://drive.google.com/drive/u/2/fo...

General instructions:

1. Assemble wing, off the car
2. Remove factory wing/factory side covers (you WILL NOT be transferring the pop clips)
3. Test fit the wing, check for gaps, issues prior to install (contact us if there is!)
4. Cut out the print template, mark the trunk to drill holes
5. Drill marked holes, starting with a small bit - drill a small hole starting on both sides, and then use a larger drill to connect both sides together
6. Clean surface, peel 3M tape
7. Install wing onto car, press 3M tape down
8. Install supplied self tapper and M6 bolt, use a dab of silicone to seal the holes drilled.
9. Install factory 8mm self tappers
10. Enjoy! Share your photos with us, @epsilonaero on Instagram!

*DISCLAIMER* All videos are for reference use only. Epsilon+ is no liable for any damage that may occur as a result of your attempt at this tutorial. You agree to perform this modification at your own risk.

For more info and quotes, contact us via email or Facebook.

email - [email protected]
Instagram - @epsilonaero
Facebook -   / epsilonaerodynamics  
online - www.epsilon.plus