Published On Premiered Jan 7, 2024
Pioneer CT-C3
Stereo Cassette Deck (1984)
TUNER-AMP: FA-C3 tuner-amp with analog AM/FM Stereo | FA-C5 tuner-amp with analog AM/FM Stereo, 5-band Graphic Equalizer | FA-C7T tuner-amp with Quartz-PLL Synthesizer preset SW/MW/FM Stereo tuner, 5-band Graphic Equalizer. All models feature the same power output: continuous average power 12.5 W/ch, min. at 6 ohm from 60-20.000Hz with no more than 5% total harmonic distortion and the same size, 225x110x150 mm. There was an additional Power Amplifier as well with continuous power output of 30 watts per channel, min. at 6 ohms from 40 to 20.000Hz with no more than 5% total harmonic distortion. Size: 225x110x192 mm, weight: 5kg.
CASSETTE DECK: CT-C3 stereo cassette deck with Dolby noise reduction and Automatic Level Control | CT-C8 stereo auto-reverse cassette deck with full-logic control, auto tape selector (Metal/Chrome/Normal), music search, Dolby noise reduction | CT-C9W stereo double cassette deck with 2+2 motor transport, double speed tape copy, relay play, full-logic control. The CT-C3 and CT-C8 have the same size 225x110x150 mm, and can be powered by any of the tuner-amplifiers or with 10 D-type batteries. The CT-C9W dimensions are 225x110x200 mm and can be operated from the mains or external DC: 12-15V.
SPEAKER SYSTEMS: CS-C3 2-way bass reflex with 12cm cone woofer and 2.5cm Ceramic Tweeter, 6ohm, 50-20.000Hz, 45W, 168x226x150 mm | CS-C7 2-way rear open type with acoustic dampers, 15x21cm Pioneer exclusive Flat Woofer and 9cm cone tweeter, 6ohm, 40-20.000Hz, 100W, 168x226x150mm | CS-C11 3-way rear open type with acoustic dampers, 15x21cm Pioneer exclusive Flat Woofer, 9cm cone tweeter and Ribbon Supertweeter, 6ohm, 30-50.000Hz, 100W, 168x336x150 mm.
Additional components are the PL-C7 belt-drive turntable, AC-C7 accessory case, AD-C23 carrying handle and mounting set.
The Pioneer exclusive FLAT WOOFER covers the front panel of the speaker enclosure edge to edge. You get much more bass in far less space. All the center is a cone tweeter to handle the mid and high frequencies with maximum clarity. A port on the rear, and special acoustic dampers on one side of each enclosure add dimension and authority to the sound. In the 3-way CS-C11 systems, superhighs are handled by the Ribbon Supertweeter.