#leddriver #choosingadriver #driverforleds

Explanations on choosing a driver for serial connection of powerful LEDs. Connection examples. Choosing an LED driver for an LED or a group of LEDs or even a group of LEDs is not a difficult task at all. The main point is to calculate the total voltage drop across all LEDs in a serial circuit, and the current is divided by the number of parallel groups. I will tell you more about calculating the voltage for a circuit of LEDs in the video and show you how it works using a visual example.

A driver for several LED modules with serial (voltage is summed up) or parallel connection (current is divided) can be selected using the same principle.

Manufacturing of LED phytolamps to order.

Telegram channel - https://t.me/quantumboard_specled
Facebook -   / specled.com.ua  
Instagram -   / specled.com.ua  

Timings:
00:24 - what you need to know to choose an LED driver
01:40 - voltage drop on LEDs of different glow colors
03:23 - connecting the first LED line to measure current and voltage
05:08 - connecting the second LED line in series
06:12 - what will happen if the total voltage of the LEDs is greater
07:01 - connecting a driver with a current of 700 mA (0.7 A)
09:42 - connecting two LED lines in parallel to each other
11:29 - the current is divided in half, about connecting LEDs on substrates
13:30 - about serial connection of LED matrices, drivers with high output voltage
14:06 - measuring the current on one of the LED lines with a parallel connection
14:14 - creating a bias with one of the two parallel-connected LED lines
16:14 - thank you all, write comments, put likes

LED lighting and accessories store - https://specled.com.ua
Buy LED phytolamps - https://specled.com.ua/ru/47-svetodio...
Knowledge base about phytolight - https://specled.com.ua/ru/content/cat...
Spectrum measurement service - https://specled.com.ua/ru/uslugi/247-...