A560 Disassembly steps:
1.Remove the battery.
2.Disassemble the propeller.
3.The landing gear. Push it in opposite directions, and then push it outward.
4.Disassemble the wing. You need to disassemble the aileron drawbars first. Use the screwdriver. Insert the screwdriver in the middle and then pry it.
Rotate the four buttons 90 degrees and remove them. Remove the slotted fuselage vane and wing.
5. Disassemble the two tail support rods. Also use the screwdriver to disassemble it.
Insert the vane back.
Disassembly is done. Now put all parts into the package.
Put the fuselage In the bottom. Put on the foam. Then put all the accessories into the bag. Put in T8S transmitter, battery, landing gear, accessory bag, charger, propellers, bag shoulder strap,
Pay attention: There are 2 rudder angles on the wing. Aligh the two rudder angles with the two holes on the foam. Put the wings on the top.
The disassembly and packing is done.

For more details of A560:
https://www.radiolink.com/a560

Purchase link of A560:
https://www.radiolink.com/a560_where_...

If any question about A560, please feel free to contact us via email: [email protected]

#3DFixedWing#A560#radiolink