Published On Dec 3, 2017
LINKS TO PARTS BELOW!
Here are the rotors, conversion hubs, brackets, spindles, and brake hoses you will need to upgrade to 1st gen Cts-v brembo's.
Calipers are factory 1st gen Cts-v calipers. These can be found at any parts store, dealer, or used online. Mine came off a 2007 car I bought from a member on Ls1tech.
I'm running C6 Z51 Corvette rotors, but as you can see the pad does hang over the rotor a bit. You can resolve this by using these modified 5th gen rotors from bigbrakeupgrade.com, or by grinding down the over hanging bit of pad. I would recommend using the 5th gen rotors, as I will be changing over to these as well.
14 Inch 5th gen ss standard rotors:
http://bigbrakeupgrade.com/product/ca...
Cross drilled version:
http://bigbrakeupgrade.com/product/ca...
Conversion Hubs:
http://bigbrakeupgrade.com/product/ls...
Conversion Hub/Spindle Assembly:
http://bigbrakeupgrade.com/product/ca...
You can also send your spindles out to be modified if you don't want to do it yourself:
http://bigbrakeupgrade.com/product/mo...
CTS-V caliper brackets:
http://bigbrakeupgrade.com/product/ca...
Brakes Hoses:
http://bigbrakeupgrade.com/product/ea...
Music:
TAKE THE CHANCE by Nicolai Heidlas Music / nicolai-heidlas
Dreams by Joakim Karud / joakimkarud
Day After Day by Joakim Karud / joakimkarud
Hold On by Joakim Karud / joakimkarud
By The Croft by Joakim Karud / joakimkarud
Rock Angel by Joakim Karud / joakimkarud