This Is How To swap And Program A New (Used) Instrument Cluster For A Volkswagen golf6 ... Reading Immo Data From Old Then Write To New
... Using VVDI2 and VVDI Prog ... Tried Pogo Pin And Eeprom Service Mode ... On Pogo Pin Method I Think Didn't Work Because Didn't Get Brake Light Only To Blink But
i'm Not Sure May Be It Worked But The Wrong Identification Of Cluster Type didn't Let Me To Continue ... Also Service Eeprom Leaded To Non Standard Login Failed ...
Finally I Found That It Should Be Nec+24c64 ... And Not Sure And Don't Know If I Choose That From The Begining