Buy Now!
New Engine Water Pump from 1AAuto.com http://1aau.to/ia/1AEWP00251

This video shows you how to install an engine water pump on your 2008-2012 Honda Accord. The water pump keeps coolant flowing through your engine. Common failures of the water pump will leave the coolant leaking, or stagnant. Both will lead to overheating if left untreated. Install a new engineered to fit water pump from TRQ for total peace of mind.

This process should be similar on the following vehicles:
2008 Honda Accord
2009 Honda Accord
2010 Honda Accord
2011 Honda Accord
2012 Honda Accord

Tools you will need:
• 10mm Wrench http://1aau.to/oa6/1AXAA00010
• 14mm Wrench http://1aau.to/oa6/1AXAA00010
• 12mm Socket http://1aau.to/oeQ/1AXAA00015
• 14mm Socket http://1aau.to/oeQ/1AXAA00015
• 19mm Socket http://1aau.to/obX/1AXAA00043
• Trim Tool Set http://1aau.to/obt/1AXXX00006
• 1/4 Inch Ratchet http://1aau.to/oed/1AXAA00017
• 3/8 Inch Drive Ratchet http://1aau.to/oeQ/1AXAA00015
• Torque Wrench http://1aau.to/ocP/1AXAA00044
• Gloves http://1aau.to/oY/1AXSS00048
• Safety Glasses http://1aau.to/oR/1AXAA00343
• Drain Pan http://1aau.to/o7/1AXAA00320
• Funnel http://1aau.to/or/1AXAA00310

Subscribe:    / @trq  

Check out our playlist:
Honda Accord 2008-12 8th Gen:    • Honda Accord 2008-12 8th Gen  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.