Buy the STL files here: https://cults3d.com/en/3d-model/gadge...

Tools Needed:
360 Grit Wet/Dry Sandpaper
Scalpel / Exacto Knife
Super Glue
Scissors
Screwdriver that can fit m3 screws
Lubricant Oil (not necessary but does make the mechanism run smoother)
Small File (optional)
Tweezers (optional) makes attaching elastics easier
Pliers (optional) these are used to crush wire crimps if you use them instead of tying knots
Small Clamp (optional) makes gluing parts together easier
1.5mm Hex Screwdriver (only needed if you use the set/grub screws)

Materials:
- Size 8 rubber bands (25mm x 1.5mm)
https://www.ebay.com.au/itm/202538595...

- Size 14 rubber bands (50mm x 1.5mm) you should be able to get these at your local office supply store

- Badminton string (0.70mm / 22GA. )
https://www.ebay.com.au/itm/202839041...

- M3 screws/bolts 10mm length
https://www.jaycar.com.au/m3-x-10mm-s...

- M3x4mm set/grub screw (optional but recommended)
https://www.ebay.com.au/itm/313472086...

- Size 0.5mm aluminium cable crimps (optional but saves you tying knots instead)
https://www.ebay.com.au/itm/223102724...

- Small Springs for wheel assembly:
https://au.rs-online.com/web/p/compre...

- Velcro arm straps are just 25mm wide hook and loop Velcro straps cut to the appropriate length.

Facebook Fanpage:

https://www.facebook.com/pages/Rawice...

Music Credit:
Aurora B. Polaris - Tunnel Vision