How to install duct work and exhaust system on a wall-mounted microwave oven.

Instructions:
1. Remove range and microwave
2. Rotate roller to circulate upwards
3. Install microwave adapter with flapper
4. Tape around adapter to ensure no air leaks
5. Measure area of exhaust to cut a hole in bottom of cabinet
6. Cut hole
7. Reinstall microwave and verify opening is big enough
8. Tape area around adapter from cabinet to microwave
9. Measure area to cut hole in top of cabinet
10. Cut hole
11. Run flex duct through hole
12. Attach duct to register boot and tape
13. Seal boot to cabinet with more tape
14. Measure area to cut hole through side of the house
15. Cut hole with drywall knife on the inside
16. Cut hole with jigsaw on the outside
17. Insert hood
18. Attach duct to hood and tape
19. Test for any air leaks
20. Enjoy!

Equipment Used:
Flex Duct
Register Boot
Exhaust Hood
Bosch Jigsaw
http://www.amazon.com/gp/product/B004...
Drywall Knife (related product)
http://www.amazon.com/gp/product/B000...
Foil Tape
http://www.amazon.com/gp/product/B000...

GoPro Hero3 Black
http://www.amazon.com/gp/product/B009...
GoPro Accessory Kit
http://www.amazon.com/gp/product/B00Q...